| 1 | MG-450-01-001 | FRAME, WELDED | 1 | |
| 2 | MG-450-01-002 | ROTATOR FRAME, WELDED | 1 | |
| 3 | MG-450-01-003 | GRAPPLE SHELL, LH (SHORT LEVER) | 1 | |
| 4 | MG-450-01-004 | GRAPPLE SHELL, RH (LONG LEVER) | 1 | |
| 5 | MG-450-04-001 | LINKAGE ASSY | 1 | |
| 6 | MG-450-02-009 | SLEWING RING | 1 | |
| 7 | MG-1050-02-001 | HYDRAULIC MOTOR | 1 | Ref. 530375T3831AAAAA |
| 8 | MG-450-02-003 | HYDRAULIC CENTER JOINT ASSEMBLY | 1 | see separate chapter |
| 9 | MG-450-02-004 | BEARING BUSH | 4 | Ø45 × Ø55 × L35 |
| 10 | MG-450-03-001 | CYLINDER COMPLETE | 1 | see separate chapter |
| 11 | MG-1050-02-002 | PINION | 1 | |
| 12 | MG-450-01-005 | PLATE | 1 | |
| 13 | MG-450-04-002 | BOLT | 2 | |
| 14 | MG-450-04-003 | BOLT | 2 | |
| 15 | MG-450-05-001 | COTTER PIN | 1 | Ø4×50, ISO 1234 |
| 16 | MG-450-05-002 | DISC SPRING (BELLEVILLE) | 4 | DIN 2093 |
| 17 | MG-450-05-003 | CASTLE NUT | 1 | DIN 935 |
| 18 | MG-450-05-004 | COTTER PIN | 4 | Ø6.3×65, ISO 1234 |
| 19 | MG-450-05-005 | CASTLE NUT | 4 | M30×2, DIN 935 |
| 20 | MG-450-01-006 | WEAR BLADE, REPLACEABLE | 2 | |
| 21 | MG-450-01-007 | COVER | 1 | |
| 22 | MG-450-02-006 | BEARING BUSH | 4 | Ø45 × Ø55 × L60 |
| 23 | MG-450-07-001 | ADAPTOR | 2 | G3/8, ISO 228 |
| 24 | MG-450-07-002 | ADAPTOR | 2 | G3/8, G1/4, ISO 228 |
| 25 | MG-450-06-001 | O-RING | 4 | Ø11.8×2.4, ISO 3601 |
| 26 | MG-450-01-008 | COVER | 1 | |
| 27 | MG-450-08-001 | LUBRICATION PIPE | 1 | |
| 28 | MG-450-03-002 | HOSE KIT, HYDRAULIC | 1 | |
| 29 | MG-450-05-006 | SCREW, HEX SOCKET HEAD CAP | 4 | M12×25, ISO 4762 |
| 30 | MG-450-05-007 | SCREW, HEX SOCKET HEAD CAP | 4 | M12×80, ISO 4762 |
| 31 | MG-450-05-008 | NORD-LOCK WASHER | 4 | M12 |
| 32 | MG-450-05-009 | SCREW, HEX SOCKET HEAD CAP | 4 | M12×35, ISO 4762 |
| 33 | MG-450-05-010 | SPRING LOCK WASHER | 4 | M12, DIN 127 |
| 34 | MG-450-05-011 | SCREW, HEX SOCKET HEAD CAP | 12 | M16×70, ISO 4762 |
| 35 | MG-450-05-012 | NORD-LOCK WASHER | 12 | M16 |
| 36 | MG-450-05-013 | SCREW, HEX SOCKET HEAD CAP | 16 | M16×75, ISO 4762 |
| 37 | MG-450-05-014 | NORD-LOCK WASHER | 16 | M16 |
| 38 | MG-450-05-015 | SCREW, HEX SOCKET HEAD CAP | 2 | M12×50, ISO 4762 |
| 39 | MG-450-05-016 | SCREW, HEX SOCKET HEAD CAP | 12 | M16×35, ISO 4762 |
| 40 | MG-450-05-017 | HEX NUT | 12 | M16, ISO 4032 |
| 41 | MG-450-08-002 | GREASE NIPPLE | 8 | M10×1, DIN 71412 |
| 42 | MG-450-05-018 | PLAIN WASHER | 4 | M12, ISO 7089 |
| 43 | MG-450-07-003 | ADAPTOR | 2 | G1/2, G1/4, ISO 228 |
| 44 | MG-450-08-003 | LUBRICATION PIPE | 1 | |
mhadocs.com
